######################## ### Blueprint definition ######################## mode: queued max: 10 blueprint: name: "Mike's Motion Activated Light" description: "Turn lights on or off based on motion, plus an increasing delay when motion is continuously detected." domain: automation input: motion_sensor: name: "Motion Sensor" description: "Entity ID of the motion sensor" selector: entity: domain: binary_sensor # for some reason, using a device_class of motion_sensor ends up hiding the actual motion sensors # device_class: motion_sensor delay_seconds_helper: name: "Delay seconds (helper)" description: "The delay before the motion-off sequence will be initiated. Must be a helper so it can persist across activations." selector: entity: domain: input_number delay_seconds_default: name: "Default delay seconds" description: "The default delay before the motion-off sequence begins. Will be used to reset the running delay." default: 30 selector: number: min: 1 max: 86400 step: 1 mode: box delay_seconds_multiplier: name: "Delay seconds multiplier" description: "When the off sequence gets interrupted by new motion, multiply the delay seconds by this number. A decent value might be 2." default: 2.0 selector: number: min: 1.0 max: 1000.0 step: 0.1 mode: box delay_seconds_max: name: "Maximum delay seconds" description: "The maximum delay during no motion before the motion-off sequence begins." default: 3600 selector: number: min: 5 max: 3000000 step: 1 mode: box notice_seconds: name: "Notice seconds" description: "The number of seconds to wait in the Prep1 (Notice) scene." default: 15 selector: number: min: 1 max: 86400 step: 1 mode: box warning_seconds: name: "Warning seconds" description: "The number of seconds to wait in the Prep2 (Warning) scene." default: 15 selector: number: min: 1 max: 86400 step: 1 mode: box scene_on: name: "On Scene" description: "The scene to activate when motion is detected" selector: entity: domain: scene scene_off_prep_1: name: "Off Prep Scene 1 (Notice)" description: "The first scene to activate when motion is no longer detected (notice phase)." selector: entity: domain: scene scene_off_prep_2: name: "Off Prep Scene 2 (Warning)" description: "The second scene to activate when motion is no longer detected (warning phase)." selector: entity: domain: scene scene_off: name: "Off Scene" description: "The scene to activate when the user has failed to produce motion, and the light should be considered \"off\"." selector: entity: domain: scene on_just_before_off_seconds: name: "\"On\" just before \"Off\"" description: > When the "Off" scene is about to be shown, you may wish to quickly show the "On" scene for a number of seconds just before. This is sometimes helpful to mitigate an issue where the "On" scene doesn't apply all colors and settings correctly from an "Off" state. Set this to a value greater than 0 to enable. A value of 0 will disable this feature. Note that sometimes, a value that is too short (e.g., 1) may also cause issues. default: 1 selector: number: min: 1 max: 86400 step: 1 mode: box enabled_helper: name: "Enabled helper" description: > Helper variable that will control whether motion activation is enabled or disabled. This will allow this blueprint to correctly select the "On" or "Off" scene, based on whether motion is currently detected when disabled. An example would be a "Toggle" helper. default: # Allows no selection selector: entity: domain: input_boolean debug_mode: name: "Debug mode." description: "Enable debug mode, which increases logging." default: false selector: boolean: {} ############# ### Variables ############# variables: motion_sensor: !input motion_sensor delay_seconds_helper: !input delay_seconds_helper delay_seconds_default: !input delay_seconds_default delay_seconds_multiplier: !input delay_seconds_multiplier delay_seconds_max: !input delay_seconds_max notice_seconds: !input notice_seconds warning_seconds: !input warning_seconds on_just_before_off_seconds: !input on_just_before_off_seconds enabled_helper: !input enabled_helper debug_mode: !input debug_mode trigger_variables: enabled_helper: !input enabled_helper ############ ### Triggers ############ trigger: - platform: state id: Motion changed entity_id: - !input motion_sensor to: - "on" - "off" - platform: template id: "Enabled helper is on" value_template: "{{ (enabled_helper != None) and is_state( enabled_helper, 'on' ) }}" - platform: template id: "Enabled helper is off" value_template: "{{ (enabled_helper != None) and is_state( enabled_helper, 'off' ) }}" ########### ### Actions ########### action: - alias: "Debug log whether the enabled_helper was set" if: - condition: template value_template: "{{ debug_mode == true or true }}" then: - if: - condition: template value_template: "{{ not enabled_helper == None }}" then: - service: logbook.log data: name: "Enabled helper" message: "Enabled helper is: {{ enabled_helper }}" else: - service: logbook.log data: name: "Enabled helper" message: "Enabled helper is not set." - alias: "Debug log the enabled_helper name" if: - condition: template value_template: "{{ debug_mode == true }}" then: - service: logbook.log data: name: "Enabled helper" message: "Enabled helper name is: {{ enabled_helper }}" - alias: "Debug log the current delay_seconds value" if: - condition: template value_template: "{{ debug_mode == true }}" then: - service: logbook.log data: name: "Delay seconds" message: "Delay seconds is: {{ states[delay_seconds_helper].state }}" - alias: "Debug log the on_just_before_off_seconds value" if: - condition: template value_template: "{{ debug_mode == true }}" then: service: logbook.log data: name: "Debug: On just before off seconds" message: "On just before off is: {{ on_just_before_off_seconds }} " # Take actions based on whether the "Enabled helper" was just toggled on or off - if: - condition: trigger id: - Enabled helper is on - Enabled helper is off then: # Debug log - alias: "Debug log" if: - condition: template value_template: "{{ debug_mode == true }}" then: - service: logbook.log data: name: "Debug: Trigger" message: "Enabled helper was toggled, and has triggered this automation" # Activate the "On" scene, if motion is currently detected - alias: "Activate ON scene, if motion is currently detected, otherwise activate the OFF scene" if: - condition: state entity_id: !input motion_sensor state: "on" then: - parallel: - alias: "Activate the ON scene" service: scene.turn_on target: entity_id: !input scene_on else: - parallel: - alias: "Activate the OFF scene" service: scene.turn_on target: entity_id: !input scene_off - stop: "Done handling enabled helper" # Take actions based on whether Motion is detected - alias: "Refuse to do anything if the enabled-helper says we're OFF." if: - condition: template value_template: "{{ enabled_helper != None }}" - condition: template value_template: "{{ not is_state( enabled_helper, 'on' ) }}" then: stop: "Refusing to continue because the enabled-helper is OFF." - if: - condition: state entity_id: !input motion_sensor state: "on" # Motion is detected then: - alias: "Log that motion was detected." service: logbook.log data: name: "Motion On" message: "Motion was detected." - parallel: - alias: "Activate the ON scene" service: scene.turn_on target: entity_id: !input scene_on # Motion is not detected else: - alias: "Log that the motion-off sequence will run, due to motion no longer detected." service: logbook.log data: name: "Motion Off" message: "Initiating motion-off sequence, because motion no longer detected." # Initial period where nothing happens - alias: "Delay appropriately before doing anything" wait_template: "{{ states[motion_sensor].state == 'on' }}" timeout: "{{ states[delay_seconds_helper].state }}" - if: - condition: state entity_id: !input motion_sensor state: "on" then: - stop: "Motion detected again during initial delay." - alias: "Log that the initial delay has finished." service: logbook.log data: name: "Motion Off" message: "Finished initial no-motion delay" # Notice period, where the notice scene is shown - alias: "Log that the notice period has begun." service: logbook.log data: name: "Begin notice period" message: "Begin notice period; Waiting while motion is still off." - parallel: - alias: "Activate Scene: Off Prep 1 (Notice)" service: scene.turn_on target: entity_id: !input scene_off_prep_1 - alias: "Delay during the notice period" wait_template: "{{ states[motion_sensor].state == 'on' }}" timeout: "{{ notice_seconds }}" - if: - condition: state entity_id: !input motion_sensor state: "on" then: - parallel: - alias: "Activate Scene: On" service: scene.turn_on target: entity_id: !input scene_on - alias: "Increase countdown timer when user interrupts the notice period." service: input_number.set_value data: entity_id: !input delay_seconds_helper value: "{{ states[delay_seconds_helper].state | int * delay_seconds_multiplier }}" - alias: "Limit delay seconds to its defined maximum" if: - condition: template value_template: "{{ states[delay_seconds_helper].state | int > delay_seconds_max | int }}" then: - service: input_number.set_value data: entity_id: !input delay_seconds_helper value: "{{ delay_seconds_max | int }}" - if: - condition: template value_template: "{{ debug_mode == true }}" then: - service: logbook.log data: name: "Limiting delay seconds" message: "Delay limited to max: {{ states[delay_seconds_helper].state }}" - alias: "Log new delay" if: - condition: template value_template: "{{ debug_mode == true }}" then: - service: logbook.log data: name: "New delay" message: "New delay is {{ states[delay_seconds_helper].state }} seconds" - stop: "Motion detected during notice period." - service: logbook.log data: name: "Notice period finished." message: "Notice period has finished (motion is still off)." # Warning period, just before the light turns off. The warning scene is shown. - alias: "Log that the warning period has begun." service: logbook.log data: name: "Begin warning period" message: "Begin warning period; Waiting while motion is still off." - parallel: - alias: "Activate Scene: Off Prep 2 (Warning)" service: scene.turn_on target: entity_id: !input scene_off_prep_2 - alias: "Delay during the warning period" wait_template: "{{ states[motion_sensor].state == 'on' }}" timeout: "{{ warning_seconds }}" - if: - condition: state entity_id: !input motion_sensor state: "on" then: - parallel: - alias: "Activate Scene: On" service: scene.turn_on target: entity_id: !input scene_on - alias: "Double countdown timer when user interrupts the warning period." service: input_number.set_value data: entity_id: !input delay_seconds_helper value: "{{ states[delay_seconds_helper].state | int * delay_seconds_multiplier }}" - alias: "Limit delay seconds to its defined maximum" if: - condition: template value_template: "{{ states[delay_seconds_helper].state | int > delay_seconds_max | int }}" then: - service: input_number.set_value data: entity_id: !input delay_seconds_helper value: "{{ delay_seconds_max | int }}" - if: - condition: template value_template: "{{ debug_mode == true }}" then: - service: logbook.log data: name: "Limiting delay seconds" message: "Delay limited to max: {{ states[delay_seconds_helper].state }}" - alias: "Log new delay seconds" if: - condition: template value_template: "{{ debug_mode == true }}" then: - service: logbook.log data: name: "New delay seconds" message: "New delay is {{ states[delay_seconds_helper].state }} seconds." - stop: "Motion detected during the warning period." - service: logbook.log data: name: "Warning period finished." message: "Warning period has finished and motion is still off." # Finally, we decide to actually turn off the lights with the "Off" scene. # Maybe turn on the "On" scene just before the "Off" scene, if the user enabled this option - if: - condition: template value_template: "{{ on_just_before_off_seconds > 0 }}" then: - alias: "Log the number of on-before-off seconds" if: - condition: template value_template: "{{ debug_mode == true }}" then: service: logbook.log data: name: "On-Before-Off seconds" message: "Will turn on for {{ on_just_before_off_seconds }} seconds before off." - service: scene.turn_on target: entity_id: !input scene_on - alias: "Wait a second to set the \"On\" scene." delay: seconds: "{{ on_just_before_off_seconds }}" else: - if: - condition: template value_template: "{{ debug_mode == true }}" then: - service: logbook.log data: name: "Won't run on-before-off" message: "Won't run on-before-off because seconds was less than 1" - parallel: - alias: "Activate Scene: Off (Done)" service: scene.turn_on target: entity_id: !input scene_off - alias: "Reset countdown timer after turning off lights." service: input_number.set_value data: entity_id: !input delay_seconds_helper value: "{{ delay_seconds_default }}" - service: logbook.log data: name: "Turning off light, due to motion off." message: "Activated off-scene and reset delay."